Using InfoMini in InfoAssist

In this section:

You can use the following information when working with InfoMini.

  1. Tab to the Format ribbon by starting at the Home ribbon or menu, and using the Right Arrow key, select the Format ribbon or menu.
  2. Using the Tab key, move to the InfoMini button.
  3. Press the Spacebar on the InfoMini button and make your selections accordingly.

    Note: Each option is a check box so you can use your Spacebar to select or clear an option. The Run Immediately check box must be checked.

  4. Once you have completed making your selections in the InfoMini menu, press the Escape key to close the menu.
  5. Use Shift+Tab to go back to the InfoMini toggle button which is cleared by default and select it by using the Spacebar. It is important to make your selections first and then check the InfoMini check box.
  6. Shift+Tab to the Run button to launch your InfoMini report.

    Note: InfoAssist will act like a new report is launching, but the InfoMini report you ran will be launched after you accept the OK button to acknowledge that you are in accessibility mode.

  7. To navigate the report, you must have your Virtual PC cursor turned on. The most efficient way to navigate to the report is by using your Frames command (Insert+F9) and then press the Enter key on the frame which will be "Doc Request.” The following navigational information can be used:

    Note: These keystrokes are for navigating an InfoMini report, whether you are accessing it from within InfoAssist or running a saved report from the tree.


Top of page

x
Running an InfoMini Report from the Tree

To run an InfoMini report from the tree, do the following:

  1. Right-click the report you want to run by pressing either Shift+F10 or your Application key.
  2. Press the Down Arrow key once to select Run.
  3. Press the Enter key on Run.
  4. Accept the OK button by pressing the Spacebar. The InfoMini report will run.

    Note: JAWS users must have their Virtual PC cursor turned on to navigate this report. The most efficient way to navigate to the report is by using your Frames command (Insert F9) and then pressing the Enter key on the Doc Request frame.


WebFOCUS